Installation and Setup
Chamber Location
3
3-3
WMDKdoc020322
Installation and Setup
3.3
Chamber Location
The kiln chamber for the Modular Kiln system should be sited on level and firm ground
taking into consideration access for handling equipment and loading/unloading the
timber.
A concrete pad is not necessary if an insulated container
1
is used. However, wooden
track support bearers, approximately 7” x 9” (18cm x 23cm), or a metal frame are required
to secure the kiln external tracks needed for loading and unloading the lumber.
See Figure 3-1.
Gravel can be added between the wooden bearers for ease of working around the loads.
1.A room with good wall insulation also can be used.
FIG. 3-1
