Safety
Safety Instructions
2
2-6
30S97doc041910
Safety
CAUTIONS FOR SAWMILL SETUP
WARNING!
Do not set up the mill on ground with more than a 10
degree incline. If setup on an incline is necessary, put blocks under
one side of the mill or dig out areas for the outrigger legs to keep
mill level. Setting up the mill on an incline could cause it to tip over,
resulting in serious personal injury.
WARNING!
Chock the trailer wheels to prevent movement before
unhitching it from the towing vehicle. Failure to do so may result in
serious injury or death.
WARNING!
Put front outrigger down before moving saw head from
the rest position. Failure to do so may result in serious injury.
WARNING!
Always make sure the trailer is supporting the sawmill
frame when operating a sawmill with adjustable outriggers. Failure
to do so may result in serious injury or death. The adjustable out-
riggers are intended to support the saw frame with assistance from
the trailer.
WARNING!
The adjustable outriggers supplied with portable saw-
mills are not intended for setup on concrete or other hard surfaces.
Long-term use of the adjustable outriggers on hard surfaces may
cause the outriggers to fail, causing the sawmill to drop. This could
result in possible serious injury or death.
If setting the sawmill up on concrete or other hard surface, replace
the adjustable outrgger legs with stationary legs.
WARNING!
Securely fasten the feet of a stationary sawmill to the
floor before operating the sawmill. Failure to do so may result in
serious injury or death.
