Sawmill Alignment
Complete Alignment Procedure
Sawmill Alignment
30S97doc041910
7-56
7
See Figure 7-48.
To adjust the saw head tilt, use the horizontal adjustment nuts. To raise
the outside of the saw head, loosen the four inner adjustment nuts 1/4 turn and tighten
the four outer nuts. Recheck the measurement from the blade to the bed rails and adjust
the horizontal adjustment nuts until the outside of the saw head is 1/16" higher than the
inside.
FIG. 7-48
3H0125-2
Adjust nuts in to raise
saw head; Adjust nuts out
to lower saw head.
DETAIL OF LOWER TRACK ROLLER ASSEMBLY
