Sawmill Alignment
Complete Alignment Procedure
Sawmill Alignment
30S97doc041910
7-34
7
See Figure 7-29.
Loosen the locking set screws and turn the inner height adjustment nut
to adjust the height of the inner end of the pivot rail. Loosen the jam nut and turn the outer
adjustment bolt to adjust the height of the outer end of the pivot rail.
6.
Move the saw head so the blade is positioned over the center of the front main bed rail.
7.
Measure the distance between the bottom of the blade and the bed rail at each end of the
bed rail. The bed rail should measure 15" (375 mm) (+1/32 [0.8 mm] -0) from the blade at
each end of the rail.
FIG. 7-29
Inner Height
Adjustment
Nut
Outer Height
Adjustment
Bolt
SM0134B
15 1/32" (375mm)
to blade
15" (375mm)
to blade
