Sawmill Alignment
Complete Alignment Procedure
7
7-47
30S97doc041910
Sawmill Alignment
Blade Guide Horizontal Tilt Adjustment
If the blade guides are tilted in the wrong direction horizontally, the back of the blade may
contact the flange as the roller is spinning down, causing it to push the blade away from
the guide roller.
1.
Remove the blade guide alignment tool from the blade and adjust the blade guide arm
halfway in.
2.
Remove the clip from the blade guide alignment tool. Place the tool against the face of
the outer blade guide roller.
See Figure 7-41.
3.
Measure between the back edge of the blade and the tool at the end closest to the inner
blade guide ("B").
FIG. 7-41 STANDARD BLADE GUIDES
FIG. 7-41 HIGH PERFORMANCE ROLLER/BLOCK GUIDES
3H0802-5B
A
B
Blade Guide
Alignment Tool
A
B
3H0802-19B
Blade Guide
Alignment Tool
