Wood-mizer LT30, Safety, Setup, Operation & Maintenance Manual

Page: 108 / 191

Maintenance 30S97doc041910 5-37
MAINTENANCE LOG
(Check Engine And Option Manuals For Additional Maintenance Procedures)
PROCEDURE
MANUAL
REFERENCE
TOTAL HOURS OF OPERATION
FILL IN THE DATE AND THE MACHINE HOURS AS YOU PERFORM EACH PROCEDURE.
A SHADED BOX INDICATES MAINTENANCE IS NOT NEEDED AT THIS TIME.
550 HRS 600 HRS 650 HRS 700 HRS 750 HRS 800 HRS 850 HRS 900 HRS 950 HRS 1000 HRS
Clean & lube mast rails See Section 5.5
Lubricate drum switches See Section 5.6
Grease pivot points and bearings/Oil chains See Section 5.7
Lubricate blade tensioner handle and rods See Section 5.8
Rotate drive/idle blade wheel belts/Check for wear See Section 5.9
Check condition and adjustment of ceramic blade
guide disks (Ceramic Only) See Section 5.2
Check brake strap tension See Section 5.10
Check belt tensions See Section 5.11
See Section 5.14
See Section 5.15
Check blade throat screw See Section 5.2
Replace cylinder drive bearing fluid See Section 5.13
Check feed & up/down chain tensions See Section 5.14
See Section 5.15
Check up/down gear box fluid level See Section 5.14
Inspect power feed and up/down motor brushes See Section 5.14
See Section 5.15
Grease up/down shaft bearing See Section 5.14