8
Force 30 Owners Manual
2015
Attach the tipping chute to the burner in the de
-
sired angle with the supplied screws. Remove
the four thumb screws that hold the cover on the
burner and remove the cover.
Remove the four screws that secure the mount
-
ing bracket to the burner. Remove the mounting
bracket.
Place a gasket material, i.e. fiberglass rope, around
the burner connection hole as shown. Note: Some
models will have a gasket attached to the mount
-
ing bracket from the factory. Skip this step if your
bracket has the gasket installed.
Renovator Pellet Burner Installation
Furnace Installation
NOTE: The wire brush used for cleaning is shipped inside one of the furnace tubes. Remove the flue tube
clean out door on the top of the furnace and remove the brush prior to installation.
Installation