16
Force 30 Owners Manual
2015
Installation
Put the top on the hopper by securing the hopper top
to the side hopper with the screws (6)
provided. Place the hopper in its location next to your
Ultra Series boiler.
Secure the boot to the intake auger tube with the
clamps provided. Apply the bottom boot to the end of
the intake auger tube and secure it with the clamp.
Tighten the clamp on the boot to secure it to the side
hopper. Apply a bead of silicon between on the auger
tube next to the inlet pipe and boiler panel to seal out
water and snow.
Raise the leg supports to a point just below the intake
auger tube. Tighten the “u” bolts on the leg supports
to secure the legs to the leg supports.
