19
Force 30 Owners Manual
2015
Route the wires from the furnace through the hole on
the filter box mounting plate and secure the plate to
the furnace with the supplied screws. The holes in the
mounting plate are pre drilled.
Place the blower on the furnace and use the provided
screws to secure it. The blower can only be installed
in the shown orientation. Do Not rotate the blower.
NOTE: All wiring should be done by qualified persons.
Once the blower is secured and wired, place the filter
box over the blower and secure it to the mounting
plate with the supplied screws. The ducting system
should be installed by qualified persons.
Installation