Controlled Document – Wombot Drafter Kit Manual V1.3
60 |
P a g e
BLTouch & End Stops
Next, in your wiring looms, locate the 3 pin Servo connector and Z Endstop coming from your
BLTouch Bed Level Sensor. Also locate the X Endstop and Y Endstop connectors. Plug them in
to your motherboard as per the following image.
Important Note: The BLTouch Servo Connector must be plugged in with the RED wire towards
the centre of the board and the BLACK wire towards the outside of the board. Incorrect
connection will result in damage to the Motherboard.
Thermistors
In your wiring looms, locate the Heated Bed and Extruder Thermistor cables. Connect them
to the motherboard as per the following image:
