Controlled Document – Wombot Drafter Kit Manual V1.3
21 |
P a g e
Locate the Heated Bed on the Bed Trolley. One corner at a time, fit a spring between the
heated bed and bed trolley. Fasten in place to a uniform height with the remaining four M3
Nyloc Nuts on the bottom of the Bed Trolley as per the following image:
Repeat for all 4 corners while making sure the cables for the heated bed are routed
between the Heated Bed and Bed Trolley, exiting towards the left rear of the bed assembly.
Wrap the bed cables with spiral wrap and cable tie to the Bed Trolley:
This completes the Y Axis assembly module. Set your frame aside for the moment and
proceed to the next section.
