Controlled Document – Wombot Drafter Kit Manual V1.3
14 |
P a g e
In your kit of parts, locate the following items:
ITEM
DESCRIPTION
QTY
1
Y IDLER BRACKET
1
2
M3 x 25mm HEX HEAD SCREW
1
3
M3 FLAT WASHER
2
4
M3 NUT NYLOC
1
5
IDLER GT2 16 TOOTH 3mm ID
1
6
M5 X 16mm HEX HEAD SCREW
2
7
M5 FLAT WASHER
2
8
M6 FLAT WASHER
2
Your Y Idler Bracket comes with the Y End stop micro switch already fitted and terminated. All
you need to do is to place the GT2 Idler Pulley into the slot and secure it with the M3
Fasteners with a washer under the bolt head and the nut. Please do not over-tighten. You
only need to bring the nut up to the surface of the washer – the bolt should still be able to
spin freely when you are finished – all we need to do here is to engage the nylon locking ring
within the Nyloc Nut.
