Wolf E Series, Service Manual

Page: 27 / 59

Page 27
2 Lift the inner door glass from the inner door.
3 Remove the inner door glass seal.
4 Remove the other inner door and inner door glass seal if
required.
INNER DOOR GLASS AND INNER DOOR GLASS SEAL
INSTALLATION
After installing the inner door glass and the inner door glass
seal, install:
1 Door front or inner door
2
Door
Install the Inner Door Glass and Inner Door Glass Seal
1 Place the inner door glass seal onto the inner door.
2 Install the gasket clips onto the inner door glass.
3 Place the inner door glass onto the inner door glass seal.
4 Place the second inner door glass seal onto the first inner
door glass.
5 Place the second inner door glass onto the inner door glass
seal.
6 Use a pair of pliers to bend the inner door glass retaining
tabs over the inner door glass.
DOOR HANDLE REMOVAL
To remove the door handle, first remove:
1
Door
2 Door front or inner door
Remove the Door Handle
1 Use a T-25 Torx bit to remove the handle mounting screws.
2 Remove the handle and handle standoffs from the door
front.
DOOR HANDLE INSTALLATION
After installing the door handle, install:
1
Door front or inner door
2 Door
Install the Door Handle
1 Place the door handle and handle standoffs onto the door
front.
2 Use a T-25 Torx bit to install the handle mounting screws.
RACK REMOVAL
Remove the Rack
1 Open the oven door.
2 Pull the rack forward out of the unit.
E Series SO24 (SWS 13543126)
Cavity Component Removal and Installation
REMOVE THE INNER DOOR GLASS AND INNER DOOR GLASS SEAL (continued)
service.subzero.com
827705 REVA 01/2019 26