Wolf E Series, Service Manual

Page: 28 / 59

Page 28
RACK INSTALLATION
Install the Rack
1 Insert the rack between the rails of the rack guide.
2 Push the rack into the oven.
RACK GUIDE REMOVAL
To remove the rack guides, first remove:
1
Rack
Remove the Rack Guide
1 Push the rack guide toward the rear of the oven.
2 Bend the top arms of the rack guide toward the rear of the
oven and pull gently out.
3 Rotate the top of the rack guide toward the center of the
oven and remove the lower rack guide arms.
RACK GUIDE INSTALLATION
After installing the rack guide, install:
1
Rack
Install the Rack Guide
1 Place the lower rack guide arms into the side wall holes.
2 Rotate the top of the rack guide toward the side of the
oven.
3 Bend the top arms of the rack guide toward the rear of the
oven.
4 Place the top arms into the side wall top holes.
5 Pull the rack guide toward the front of the oven.
LIGHT BULB REMOVAL
WARNING
Turn off the power to the product before starting this
procedure.
To remove a light bulb, first remove:
1 Rack
2 Rack guide
Remove the Light Bulb
1 Use a small flat-blade screwdriver to pry the light cover
from the light assembly.
2 Remove the light cover.
3 Use a clean dry cloth to pull the halogen bulb toward the
rear of the cavity.
4 Remove the halogen bulb.
LIGHT BULB INSTALLATION
After installing the light bulb, install:
1
Rack guide
2
Rack
Install the Light Bulb
TIP: Use a cloth to install the halogen light bulb. Oil from
fingers shortens the life of the halogen light bulb.
1 Insert the halogen bulb into the socket.
E Series SO24 (SWS 13543126)
Cavity Component Removal and Installation
service.subzero.com
827705 REVA 01/2019 27