Page 29
2
Install the light cover.
FOOD PROBE COVER REMOVAL
WARNING
Turn off the power to the product before starting this
procedure.
To remove the food probe cover, first remove:
1
2
Remove the Food Probe Cover
1
Hold the food probe cover open, and use an 11 mm
combination wrench to remove the nut under the food
probe cover.
2
Remove the food probe cover.
Food Probe Cover
(in Oven Cavity)
Food Probe Socket
(Threads in Oven Cavity)
11 mm Nut
(in Oven Cavity)
FOOD PROBE COVER INSTALLATION
After installing the food probe cover, install:
1
2
Install the Food Probe Cover
1
Place the food probe cover onto the threads of the food
probe socket.
2
Hold the food probe cover open, and use an 11 mm
combination wrench to install the nut onto the food probe
socket.
BROIL ELEMENT REMOVAL
WARNING
Turn off the power to the product before starting this
procedure.
To remove the broil element, first remove:
1
2
Remove the Broil Element
1
Use a T-20 Torx bit to remove the screws from the thermo-
circuit breaker of the broil element.
2
Pull the broil element forward into the oven cavity.
3
Use needle-nose pliers to disconnect the wire connectors
from the broil element terminals.
BROIL ELEMENT INSTALLATION
After installing the broil element, install:
1
2
Install the Broil Element
1
Use needle-nose pliers to install the wire connectors onto
the broil element terminals.
2
Install the broil element into the oven cavity.
3
Use a T-20 Torx bit to install the screws into the thermo-
circuit breaker of the broil element.
E Series SO24 (SWS 13543126)
Cavity Component Removal and Installation
INSTALL THE LIGHT BULB (continued)
service.subzero.com
827705 REVA 01/2019
28
