manualshive.com logo in svg

Wolf E Series, Service Manual

Share
Download
Wolf E Series Service Manual Download Page 23

Page 23

FAVORITES MENU

The Favorites menu saves recipes to a shortened menu for easier access.

Favorites Menu

Name and Symbol

Submenu

Action

Information

 Favorites

 Manage

Favorites

 Back

Return to prior menu.

 Create New Favorites

Touching   on the Manage Favorites menu shows

the message: Make the settings and then select
the   button to save.
To create a new favorite:

▪

Select the cooking mode or recipe and adjust

the Cooking Mode submenu to the needed

parameters.

▪

Before the cooking begins, tap  .

▪

Select the storage space.
TIP: Defaults to first open storage space.

▪

Tap Enter.

▪

Name the recipe.

 Change Favorites

Touching   on the Manage Favorites menu shows

the message: Make the settings and then select
the   button to save.
To change a favorite:

▪

Select the cooking mode or recipe and adjust

the Cooking Mode submenu to the needed

parameters.

▪

Before the cooking begins tap  .

▪

Select the storage space that is changing.
TIP: The change option overwrites any storage

space selected.

▪

Tap Enter.

▪

Acknowledge the overwrite.

▪

Rename the recipe if desired.

 Delete Favorites

Touching   on the Manage Favorites menu shows

the recipes saved in the storage space.

▪

Use the arrows to select the recipe to delete.

▪

Acknowledge the delete message.

 

 

to

 

 

Select Store Recipes

List of stored recipes:

▪

Use arrow keys to select

the stored recipes.

▪

Touch Enter.

▪

Confirm rack position if

listed.

▪

Edit cooking submenu

options.

▪

Press  .

E Series SO24 (SWS 13543126)

Controls and Operation

 

service.subzero.com

827705 REVA     01/2019

22

 

Summary of Contents for E Series




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands