manualshive.com logo in svg

Wolf E Series, Service Manual

Share
Download
Wolf E Series Service Manual Download Page 10

Page 10

Name and

Symbol

Submenu

Cut or Type

Cooking Method

Information

Settings

 Roast

▪

With preheat.

▪

 Place baking

tray on rack

position 1 under

the wire rack.

▪

 Put food

directly on the

wire rack.

▪

 Set up if desired

▪

 410°F

▪

 Set Duration: 1:15

▪

 Start

 More Gourmet

▪

Without preheat.

▪

Continue:

Medium Browned

or Well Browned.

▪

 Set End: Adjustable for

Medium Browned

▪

 Set End: Adjustable for

Well Browned

▪

 Start

5. Meat Products 5.1 Bratwurst

 Broil

▪

With preheat.

▪

Rack position 4.

▪

 Place baking

tray on rack

position 2 under

the wire rack.

▪

 Preheat

cooking space for

3 minutes.

▪

 Put food

directly on the

wire rack.

▪

 Turn half way

through the

cooking time.

▪

 Set up if desired

▪

 Set Duration: 0:14

▪

 Start

5.2 Meat Loaf

 Cook

▪

With preheat.

▪

 Set up if desired

▪

 390°F

▪

 Set Duration: 1:00

▪

 Start

6. Dutch Oven

6.1 Roast

 Braise

▪

Without preheat.

▪

 Set up if desired

▪

 410°F

▪

 Set Duration: 1:25

▪

 Set End: Adjustable

▪

 Start

 Poultry

1. Chicken Legs

 Broil

▪

With preheat.

▪

Rack position 3.

▪

 Preheat

cooking space for

3 minutes.

▪

 Place baking

tray on rack

position 2 under

the wire rack.

▪

 Turn half way

through the

cooking time.

▪

 Put food

directly on the

wire rack.

▪

 Set up if desired

▪

 4

▪

 Set Duration: 1:20

▪

 Start

2. Half Chicken

 Broil

▪

With preheat.

▪

Rack position 2.

▪

 Set up if desired

▪

 3

E Series SO24 (SWS 13543126)

Controls and Operation

Gourmet Controls 

service.subzero.com

827705 REVA     01/2019

9

 

Summary of Contents for E Series




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands