Attention! Never stops the router without requesting the reboot process, and do not
remove the power socket without restarting the router before this action!
Antenna
Check or connect proper SMA fit antenna to the Antenna connector and mount it to the interface.
The router must send and assure proper RSSI signal value and life signals.
If you will receive 99 RSSI and CSQ signals during minutes, that means you have to use another
antenna or move the antenna or the router for another position where you will get enough signal
reception.
Always use the antenna type regarding to the used module and mobile network, bandwith, which
is harmonized to the frequency/band. In other way the router will not abble to access the network.
Note that for Narrow Band (NB-IoT) networks it could be needed to wait 5-15 minutes for the first
successfully network registration. Please be patient.
Connection to the router, checking the connection
Configure the Ethernet interface IP address on your PC where you can access it (Control panel
/ Network / Network Adapter / Adapter settings). Ping the router IP address.
When the router will not started…
Follow the hints of the Installation manual.
