Setup the module for connecting to the NB-IoT mobile network (according to the assembled module
type) – at the WAN interface tab.
Configure the module to the wireless internet and for Narrow Band network connection (by the
modem type and network behaviour) here for the WAN interface.
For configuring end enabling the roaming settings – in case of international or country border
usage – you may need to setup the Mobile country code and Mobile network code parameters
– even if you are attempted to use only a prefered mobile network.
The international country codes can be found here:
Ask your mobile operator about the available international settings.
You can define the SIM #1 APN account name, and the SIM #1 PIN code if it is necessary for
the connection.
Here you will found some examples for the APN settings.
M2M APN (enclosed)
APN name: wm2m
Public Internet APN
APN name: net
Attention!
ALWAYS use the given APN name and password of your Mobile Operator.
Automatic mode
When you not set any value for the APN, the router will connect by the SIM-card automatically
to the next available network’s available APN.
Attention!
The available APN settings will be assured by the SIM card provider mobile operator or your
mobile internet service provider.
