You can order a power supply from us, or buy one. Please consider the wiring and polarity, according
to the previous figure of connector pinout. (Top 2-pins of the microfit plugin are wired only, the left
pin is the negative.)
No power?
Check router that it can get any power through its microfit connector (POWER) – power adapter is
connected to the router microfit connector and the adapter to the 230V AC plug.
When it receives 12V DC power, the LED signals will sign it:
all the three LEDs will light for a short
period, then the LED1 (green) will light for 2 minutes, then after that only blinks once in every 10
seconds. The router is booting and just started.
(Wait for 1-2 minutes, while the router is registering to the wireless network then check the life
signals).
In case of failure, check the power supply connection at the socket plug side and on the microfit
connector at the router side. The top 2-pins of the microfit plugin are wired only, the left pin is the
negative. Check the 12V DC voltage on the microfit connector (by a multimeter) of the power
adapter that it provides 12V or not. If not, than remove the 12V DC adapter and get another one
with the proper pinout and voltage.
Ethernet connectivity
Check or connect the RJ45 UTP6a type cable to the ETHERNET port. When the router is operating,
the Ethernet port LEDs must sign the network activities.
When you cannot access router through SSH or on its web interface
The DHCP service is turned off for the router Ethernet interface, by default. Therefore, you have to
configure an IP address for you PC, manually. Add fog e.g. 192.168.127.10 IP address to your
computer’s Ethernet interface for connecting to the router. (For microUSB connection use the
192.168.10.1 address)
For accessing the web user interface we offer the Mozilla Firefox web.
Default web user interface (LuCi) address is:
Username:
root
Password:
wmrpwd
then push to the Login button.
Allow the accessing of the router default IP address in your browser by pushing to the Special
button, then allow the safety exclusion into the pop-up window.
