W7500S2E-R1 user manual
1
1
Introduction
1.1.1
Configuration methods
W7500S2E-R1 provides three types configuration methods for user to operate with the module.
WIZS2E ConfigTool is a computer software configuration tool. It can be installed and
run in Windows® environment.
Web page configuration allows user locally or remotely to configure the module through
web browser.
AT command configuration support sending serial commands from the mainboard of the
embedded device or from the serial terminal to configure the parameters of WIZS2E
modules.
1.2
Specifications
1.2.1
Electrical characteristics
1.2.1.1
Voltage and current characteristics
The following table 1-1 and 1-2 was the result tested in 25
o
C environment.
Table 1-1 Voltage and current characteristics
1.2.1.2
Current characteristics
Table 1-2 Current characteristics
1.2.2
Dimensions
For fitting the module into your design, please refer to the reference figure 1-1; It shows all the
dimensions of the modules. In the figure, it provides the regulation for three dimensions with the
distance of left and right pin headers and the location of the one mounting holes. The pin header
has pitch 2.54mm.
Symbol
Types
Ratings
Min
Normal
Max
Unit
V
DD
Module Voltage
2.97
3.3
3.6
V
I
Module Current
101
106
157
mA
Working Mode
Ratings (mA)
Working Mode
Ratings (mA)
Standby
101
100Mbps without connection
157
10Mbps without connection
106
100Mbps with data communication
157
10Mbps with data communication
106
