W7500S2E-R1 serial to Ethernet module
W7500S2E-R1 user manual
35
7
Web page configuration
WIZS2E module support web page configuration, it is recommended to use browsers including
Internet Explorer 11, Chrome and Firefox. For other browsers, it may display or working improperly.
The below example is using the Chrome browser.
Before using the web page configuration, you need to make sure that W7500S2E-R1 can be accessed
correctly, that is, if you are configuring within the local area network, W7500S2E-R1 needs to be on
the same network segment as the computer, and if you are remotely configured, you need to port-map
W7500S2E-R1 to the public network IP. The following is a local area network example configuration,
the configuration method is described below.
7.1
Main page
Starting the Chrome browser, input the IP address of WIZS2E module into address bar. Factory
default: 192.168.1.88. Figure 7-1 shows the login page.
Figure 7-1 Login page
The default password is “admin”, click login button to enter the W7500S2E-R1 configuration main
page. Please know that the time session for the W7500S2E-R1 webserver is 5 minutes. If over 5
minutes of inactivity, re-login is required.
Figure 7-3 shows the basic information for the web page. To exit the site, please press “Logout”
that shows on the right top corner of the web page.
This page shows the basic information of the WIZS2E module. It is separate into four sections;
the following paragraph talking about each section.
