W7500S2E-R1 serial to Ethernet module
W7500S2E-R1 user manual
15
3.
“Search again!”: This function is convenient for users to keep the original device list
unchanged when batch configuring devices, and the newly searched device information
is list below the original device list.
Figure 5-1 Right mouse click menu
5.4
Factory reset
If the customer found out some uncertainties with the WIZS2E module, the user could reset the
module back to factory default setting to solve the problem. There are three kinds of method to
factory: Software (ConfigTool), AT command and hardware reset.
5.4.1
Factory reset setting by software
I.
In the WIZS2E ConfigTool, please click the module on the search section that needs to
factory reset.
II.
Please press toolbar’s
→
factory reset button to reset the
module back to default settings.
5.4.2
Factory reset module through AT command
For detail information about this AT command (AT+DEFAULT) for factory reset, please refer
section 6.4.2.6.
