W7500S2E-R1 serial to Ethernet module
W7500S2E-R1 user manual
13
5
WIZS2E ConfigTool
WIZS2E ConfigTool is a Windows® configuration tool compatibles to W5500S2E and
W7500S2E series modules. WIZS2E ConfigTool can be used to search, enquiry and configure
W5500S2E and W7500S2E device features and information.
5.1
Collect module’s setting information
Click the toolbar’s
button, WIZS2E ConfigTool will search all WIZS2E module that
has connected in the same network segment (Direct connect or under the same router). The
figure 5-1 shows the result as mentioned. The search section shows all the modules in MAC
address format as the parent node for the list of information of WIZS2E module. By pressing the
“ ” button, it shows the detail information about this module. After pressing the MAC address
of that specific module, it will list out all the IP address, serial interface settings and other
parameters of this module. This information presents on the Basic settings and Advance Option
tab that were next to the search section.
Note: Prior configuration, it is recommended that you disable other unrelated network adapters in
your host computer (including virtual network adapters, if you use the wired network adapter
configuration module to turn off the wireless network card) and ensure that all device IP
addresses in the LAN are not conflicting.
Figure 5-1 WIZS2E ConfigTool basic settings interface
