Original operation manual
25
AirlessPhoenixGX_BA_en_1803 • 0550010-en • jw
Machine description
The technical data for your machine can be found in the technical
data (see page 3) or on the type plate.
3.1 Intended use
The
WIWA
Phoenix series spray devices are intended for both
airless spraying (in the airless design) and air-supported spraying
(in the AirCombi design) of coating materials and additives in
surface technology.
The Phoenix GX series was especially developed for the wood and
metalworking sector in industry and trade.
The Phoenix GX series is suitable e.g. for processing
➤
Primer
➤
Spray filler
➤
Sprayable lacquers and paints
➤
Two-component and tar epoxy paints (highly viscous and
coarsely pigmented)
➤
Textured paint
➤
Hammer effect lacquer
➤
Zinc dust paint
➤
Corrosion protection and micaceous iron paints
➤
Low-solvent and solvent-free paints
➤
Mordants
➤
Water-based varnishes
➤
Clear lacquers
➤
Thick-layered stains
Intended use also includes:
➤
observing the technical documentation and
➤
complying with the operating, maintenance and servicing
guidelines.
3.2 Erroneous use
Any use other than that stipulated in the technical documentation is
deemed to be erroneous use and will void the warranty.
Erroneous use applies in particular if
➤
impermissible materials are processed,
➤
unauthorized modifications or changes are implemented,
➤
the safety features are removed, modified or bypassed,
