Original operation manual
31
AirlessPhoenixGX_BA_en_1803 • 0550010-en • jw
Transport, installation, and assembly
4.3 Assembly
WARNING
If untrained personnel carry out assembly work, they endanger
themselves and others, and risk the operational safety of the
machine.
➤
Electrical and electronic parts may only be installed by
specialist personnel with electrical training – all other parts,
e.g. the spraying hose or spray gun, may only be installed by
personnel trained for this.
WARNING
During installation work, ignition sources may arise (e.g. due to
mechanical sparks, electrostatic discharge, etc.).
➤
Carry out all assembly work outside of potentially explosive
areas.
Prior to commissioning, correctly refit any parts or equipment items
removed for transport purposes, as required for the intended use.
4.3.1 Connecting the spraying hose and spray gun
WARNING
Parts that are not designed for the maximum permissible working
pressure of the machine may rupture and cause serious injury.
➤
Prior to installation, check the maximum permissible working
pressure of the spraying hose and the spray gun. It must
be greater than or equal to the maximum working pressure
stated on the type plate.
1.
Connect the spraying
hose to the material outlet
on the high pressure filter
(see Fig. 12).
2.
Connect the other end of
the spraying hose to the
spray gun.
Fig. 12
:
Connecting the spraying hose
