16
Original operation manual
AirlessPhoenixGX_BA_en_1803 • 0550010-en • jw
Safety
WARNING
Heating solvents can lead to an explosion. Serious personal
injuries and property damage may result.
➤
Observe the flashpoint and ignition temperature of solvents.
➤
Switch all material fluid heaters off when carrying out the
following work: Cleaning, pressure testing, decommissioning,
maintenance and repair.
2.2.6 Health risks
CAUTION
Depending on the materials being processed, solvent vapors
may arise, which could cause damage to health and property.
➤
Make sure the workplace is sufficiently ventilated and aired.
It is necessary to guarantee at least 5-times air exchange.
➤
Always observe the processing instructions of the material
manufacturer.
When handling paint, cleaning agents, oils, greases, and
other chemical substances, observe the safety and portioning
instructions of the manufacturer and the generally applicable
regulations.
Only use suitable skin protection, skin cleansing and skincare
products for cleansing the skin.
In systems that are closed or under pressure, dangerous chemical
reactions may arise, if parts produced from aluminum or galvanized
parts come into contact with 1.1.1 - trichloroethane, methylene
chloride or other solvents that contain halogenated chlorinated
hydrocarbons (CFCs). If you wish to process materials that contain
the aforementioned substances, we recommend that you contact
the material manufacturer to clarify their suitability for use.
A range of machines in rust and acid-resistant designs is available
for these types of materials.
