Original operation manual
43
AirlessPhoenixGX_BA_en_1803 • 0550010-en • jw
Maintenance
6.3 High pressure pump
6.3.1 Checking the release agent for material residues
If material residues are discovered in the release agent, you must
assume that the packing for the respective fluid pump is worn.
In this case, have the pump packing replaced as quickly as
possible.
6.3.2 Filling the release agent and checking the fill level
Prior to every commissioning, check the release agent level if
possible. Top off the release agent if necessary. We recommend
using the release agent from
WIWA
(order no. 0163333).
No. Description
1
To fill the release
agent, slide the cover
for the filler opening
to the side and press
the release agent
in by means of the
dosing bottle.
2
The release agent
should be at the
center of the
inspection glass
for optimal filling.
Fig. 18
:
Filling and checking the release agent
2
1
6.4 High pressure filter
6.4.1 Cleaning the filter element
The cleaning interval for the filter elements in the high pressure
filters is dependent on the type and cleanliness of the material.
Clean the filter elements at least 1x per week and with every
material change.
