2
017-
03
94
Configuration via Device Type Manager (DTM) and PACTware
The IP address, bus address and UDP port of the communication DTM must match the
parameters of the WirelessHART gateway. In some cases, for example, if the WirelessHART
gateway has already been used in another project, you may have to edit these parameters.
When using a new WirelessHART gateway, there is no need to change these parameters,
because the default settings of the WirelessHART gateway already match the default settings
of the Ethernet Communication DTM.
Edit DTM Addresses of the Ethernet Communication DTM
1. Right-click
HART IP Communication
.
2. Choose
Additional Functions > Set DTM addresses
.
The
Set DTM addresses
window is displayed.
Figure 6.2
Set DTM address
window
3. Change the parameters as required (see following table).
4. Click
Update changed data
to apply the new settings.
5. Disconnect and re-establish the connection between the DTM and the WirelessHART
gateway to activate the new settings.