Product Specifications
2
017-
03
17
Note!
When using the DIP switches 5 ... 6 for setting the baud rate, this baud rate applies for the
HART protocol as well as the MODBUS protocol. Alternatively you can set the baud rate using
the configuration software. See chapter 5.3.3 see chapter 5.3.4
If using the configuration software you can set individual baud rates for the HART protocol and
the MODBUS protocol.
DIP switches 5 ... 6
SW5
SW6
Baud rate
OFF
OFF
9600
ON
OFF
19200
OFF
ON
38400
ON
ON
57600
Note!
The security mode has to be enabled (DIP switch 8) to change the join key using the DTM or
web interface or to reset the join key and network ID using the buttons inside the enclosure of
the WirelessHART gateway.
Caution!
Network security risk
Do not to use the security mode connection as a normal communication channel.
After the join key has been changed, disable the security mode (DIP switch 8 = OFF).
DIP switches 7 + 8
SW7
RS-485
termination
SW8
Security mode
ON
Connected
ON
Enabled
OFF
Disconnected
OFF
Disabled