Operation Manual CoatMaster
9/83
2
Safety
This section gives an overview of all relevant safety aspects for an optimal personal protection as
well as for a save and undisturbed operation.
2.1
Responsibility of the operator
The head of the laboratory is responsible for training his/her personnel.
The operator shall inform the manufacturer without delay of any safety-‐related incidents which
might occur during operation of the device or its accessories.
Issues can be reported to the e-‐mail address: [email protected]
Legal regulations, such as local, state and federal laws applying to the device or its accessories must
be strictly followed.
2.2
User qualification
Before the use of the CoatMaster the operation manual must be read and understood.
The device may only be used by laboratory personnel and other persons who on account of training
or professional experience have an overview of the dangers which can develop when operating the
device.
2.3
Proper use
The CoatMaster is exclusively designed for the coating thickness measurement. It can be used for the
following coatings:
Uncured powder coatings, glue as well as wet paint before and after drying and ceramic layers on all
materials.
The device must only be operated and cleaned by trained personnel. The proper use also includes
adherence to all information in this manual.
2.4
Improper use
Applications not mentioned above are improper. Also, applications, which do not comply with the
technical data, are considered improper. The operator bears the sole risk for any damages caused by
such improper use. The following uses are expressly forbidden:
•
Use of the CoatMaster in environments, where liquids can enter the housing.
•
Introduction of any objects into the CoatMaster.
•
Opening the CoatMaster’s housing. Exception: Unmounting the rear cover for cleaning or
changing the filter pad (see chapter 7.3). This is also valid when the CoatMaster is not con-‐
nected to the mains. When the CoatMasters is opened, the warranty will become void and
the manufacturer disclaims all liability.
•
If water emerges from the CoatMaster, unplug the device immediately and contact the tech-‐
nical support.
Technischer support for the CoatMaster +41 (0) 52 212 02 77, [email protected])
Summary of Contents for CoatMaster
