Winmate R10IBWS-MHP1, User Manual

Page: 69 / 79

M-Series HMI Mounting Solutions
User Manual
69
• Keep the wires separated according to the interface. Wires that share similar
electrical characteristics must be bundled together.
• Do not bundle input wiring with output wiring. Keep them separate.
When necessary, it is strongly advised that you label wiring to all devices in the
system.
6.3 Mounting Guide
M-series HMI devices come with different mounting options suitable for most of the
industrial and commercial applications. The main mounting approach is chassis - very
user-friendly in terms of installation. Refer to sub-sections below for more details.
6.3.1 VESA Mount
• Dimensions: 75 x 75mm
• Screw hole diameter: VESA M4 x 5mm
• Compatible with swimming arms mounting kits.
*with customer’s bracket
Mounting Steps:
1. Screw VESA Bracket to the fixture (ex. wall) with M4x5 flat-head screws.
2. Place the device on VESA bracket.
NOTE:
Notice that both hooks on bracket should lock the notches on
the back cover of the device.