Winmate R10IBWS-MHP1, User Manual

Page: 22 / 79

M-Series HMI Getting Started
User Manual
22
2.1.3 Connecting the Power
Connecting to AC Power Source
1. Plug one end of the terminal block cable firmly to the DC IN Jack.
2. Plug the other end of the terminal block to the AC adapter.
3. Connect the AC adapter to the power cord.
4. Plug the power cord to a working AC outlet. The device will boot automatically.
Connecting to DC Power Source
1. Insert the exposed wires of the DC Power Cable to the appropriate connectors on
the terminal block plug.
Note:
Power cords vary in appearance by region and country.