Winmate R10IBWS-MHP1, User Manual

Page: 57 / 79

M-Series HMI BIOS Setup
User Manual
57
BIOS Setting Description Setting
Option Effect
Legacy USB
Support User can enable or disable
USB port. Disable Will keep USB devices
available only for EFI
applications.
Enable Enable all the USB devices
USB 3.0
Support User can enable or disable
USB 3.0 (XHCI) controller
support. Enable Enable USB 3.0 is enable
Disable USB 3.0 is disable
XHCI Hand‐off This is a workaround for OSs
without XHCI hand‐ off
support.
Disable Disables this function
Enable Enables this function
EHCI Hand‐off This is a workaround for OSs
without ECHI hand‐ off
support.
Disable Disables this function
Enable Enables this function
USB mass
storage driver
support User can Enable or disable
USB mass storage driver
support. Disable Disables this function
Enable Enables this function
USB Transfer
time‐ out The time‐out value for
control, bulk, and interrupt
transfers. 1 Sec
5 Sec
10 Sec
20 Sec Depends on the time‐out
value
Device Reset
time‐ out USB mass storage device start
unit command time‐ out. 10 Sec
20 Sec
30 Sec
40 Sec Depends on the time‐out
value
Device power‐
up delay Maximum time the device
will take before it properly
reports itself to the host
controller. Auto Uses default value: for a
root port it is 100 ms, for
a Hub port the delay is
taken from Hub descriptor