Wilson Electronics MAXX 2 Series, Owner'S Manual

Page: 57 / 83

S e c t i o n 6 . 1 – P a i n t e d F i n i s h
Your MAXX loudspeakers are hand painted with WilsonGloss™ paint and hand pol-
ished to a high luster. While the finish seems quite dry to the touch, final curing and com-
plete hardening takes place over
a period of several weeks. To
protect the finish of the MAXX
during final manufacture, ship-
ment, and setup in your listening
room, we have applied a remov-
able layer of protective film over
the finish. We recommend that
this film be left in place until the
speakers are in their final loca-
tion in your listening room.
Once you have determined their
final position, remove the film by
peeling it off. Do not leave this
film on indefinitely as it may
leave impressions on the paint.
It is important that the delicate paint finish of the MAXX be dusted carefully with the
dust cloth, which has been provided. We recommend that the following procedure be
observed when dusting the speakers:
• Blow off all loose dust.
• Using the special dust cloth as a brush, gently whisk off any remaining loose
dust.
57
S
E C T I O N
6 - C
A R E O F T H E
M A X X