Wilson Electronics MAXX 2 Series, Owner'S Manual

Page: 58 / 83

• Shake out the dust cloth.
• Dust the finish, using linear motions in one direction parallel to the floor.
Avoid using circular or vertical motions.
Because the paint requires a period of several weeks to fully cure, we recommend that
no cleaning fluids, such as glass cleaners, be used during this initial period of time. When
the paint is fully cured, heavy fingerprints and other minor smudges may be removed with a
glass cleaner. Always use the dust cloth. Stronger solvents are not recommended under any
circumstances. Consult your dealer for further information if required. To maintain the
high luster of the finish, periodic polishing may be desired over the years. We recommend a
nonabrasive carnauba-based wax and a soft cloth.
S e c t i o n 6 . 2 – B r e a k - i n P e r i o d
All audio equipment will sound its best after its components have been broken in for
some period of use. Wilson Audio breaks in all woofers and mid-range drivers for a 12-hour
period. All drivers are then tested, calibrated, and matched for their acoustical properties.
In your listening room, expect 25 to 50 percent of break-in to be complete after two hours of
playing music fairly loudly. Ninety percent of break-in is complete after 24 hours of playing.
Playing a “disc repeat” overnight can accomplish this task quickly. Wilson Audio recom-
mends chamber music for this task.
S e c t i o n 6 . 3 – E n c l o s u r e C o n s t r u c t i o n
At the core of each Wilson Audio loudspeaker design is the knowledge that to achieve
the best performance, you must start with the best materials. Here are a few of the elements
that contribute to the MAXX enclosure’s supreme performance.
58
M A X X S
E R I E S
2 O
W N E R
’
S
M
A N U A L