Wilson Electronics MAXX 2 Series, Owner'S Manual

Page: 25 / 83

Note: You will have two Bass Modules as well as two Upper Modules to unpack. The
two modules will need to be separated into right and left channels. Clear out two
spaces, one for your left and one for your right channels. Place the ODD numbered
modules in the LEFT channel section and the EVEN in the RIGHT channel section.
S e c t i o n 2 . 1 – U n c r a t i n g t h e M A X X
I n i t i a l C h e c k
The MAXX is shipped in three wooden crates. Upon receiving these crates, please
check their condition. If any of the crates are damaged, please report it to the shipping com-
pany immediately for insurance verification.
Tools Required:
• Metal shears
• Variable speed, reversible electric drill
• Phillips head drive bit
U n c r a t i n g t h e W o o f e r M o d u l e s
A minimum of two strong adults is required to set up the system. Locate the two
largest crates labeled “Woofer Modules.” These contain the woofer enclosures and are the
first components of the system to unpack (see Figure 3).
Note: These two woofer enclosures are very heavy and care should be taken to prevent
injury.
To uncrate the woofer:
1. Open the top of each crate and determine the side where the casters are connected
to the bottom of the woofer module.
2. Remove the packing material from between the casters and set the crate up so that
25
S
E C T I O N
2 - I
N I T I A L
P
R E PA R AT I O N