Wilson Electronics MAXX 2 Series, Owner'S Manual

Page: 53 / 83

• Gently press the cover into the hole, taking care
to not mar the paint on the fascia or the hole
cover itself.
• If the cover does not sit flush, remove it from
the hole and gently bend the prongs on the rear
of the button inward.
• Repeat for the rest of the holes.
Note: When removing the hole covers from the fascia, never pry them with a metal
screwdriver or other metal tools as this will damage the paint. To gently remove the
cover, use a plastic screwdriver, first covering the tip with cloth.
53
S
E C T I O N
5 - F
I N I S H I N G
U
P
F
I G U R E
1 8 - F
A S C I A H O L E
C O V E R
F
I G U R E
1 9 - F
A S C I A H O L E S
I
N S TA L L
H
O L E
C
O V E R S