Wilson Electronics MAXX 2 Series, Owner'S Manual, Page: 67 / 83

67
S
E C T I O N
7 - T
R O U B L E S H O O T I N G
If the problem is solved:
If the problem persists:
If the problem is solved:
If the problem persists:
67
Turn the amplifier off and disconnect it from
the AC wall outlet. Disconnect the speaker
leads at the main input to the speaker. Now
turn on the amplifier.
Call your Wilson Audio dealer. There may be
a problem with the crossover or the speaker’s
internal wiring.
Continue to the next step.
Turn the amplifier off and disconnect it from
the AC wall outlet. Disconnect the speaker
cable leads to the amplifier and turn the ampli-
fier on again.
You have a short in your speaker cables.
Check for frayed ends, holes (from spike feet),
or make sure that your spade lug is not touch-
ing the chassis while it is connected to the
binding post.
Call the dealer where you bought your amplifi-
er. You appear to have a problem with this
component.