Wilson Electronics MAXX 2 Series, Owner'S Manual

Page: 59 / 83

M a t e r i a l
The MAXX’s low frequency enclosure is constructed from a high-density, phenolic
resin based composite. This composite meets and exceeds the highest of ANSI test stan-
dards for its use, while offering very tight tolerances, high hardness, uniform density, and
dimensional stability. In the
construction of the MAXX,
Wilson Audio uses two types
of composites dubbed “X”
material and “M” material.
These strategic combinations
of X and M materials are used
in the two midrange modules,
resulting in the most inert
enclosures yet produced. X
material is used exclusively in
the woofer and tweeter mod-
ules.
The high hardness of
this composite not only offers
excellent acoustical proper-
ties, but it also provides an
ideal surface for painting.
A d h e s i v e
Wilson Audio has conducted exhaustive research into the best adhesives to perma-
nently bond our speaker enclosures. This is an often-overlooked element crucial to the
59
S
E C T I O N
6 - C
A R E O F T H E
M A X X