15
Wilo-WiBooster - Installation and Operation Manual
10 Email Configuration
Configures email settings to allow email notifications. Currently
there are only 3 emails that can be sent out: Test email, General
Alarm, and General Alarm Clear. Email notifications require
that the PLC be connected to the internet. Email does not
support SSL encryption, only email accounts which support
unencrypted email can be used as the sending email account.
All email addresses will receive email sent through the PLC.Sets
the PLC name. This is effectively the password for logging into
the PLC remotely. Default is V700-1
1. Name of the mail server. No default. Due to the requirement
of using an unencrypted mail server, typical free email
accounts like gmail or outlook will not work. Accounts with
https://www.smtp2go.com/ have been verified to work
2. Port number associated with mail server. Default 587.
3. Email user name. This is the applicable user name for the
mail server
4. Email password. This is the password associated with the
user name.
5.
From email. The email address that the notification will
appear to come from.
6. To email. The email address that will be the destination of
the email.
7. CC email. Allows email to be sent to an additional address.
8. Location. This is the message that will appear in the body
of the email. The subject of the email is either “Test Email”.
“General Alarm” or “General Alarm Clear”
9. Send Test email by pressing this button. PLC requires a
second or two between sending emails. If two events occur
that would both send an email at the same time, one of the
emails may be lost.
11 Communication
1
3
4
5
6
7
8
2
9
