Wilo Geniax Central Control, User Manual

Page: 13 / 118

User manual Wilo-Geniax Central Control 11
Overview of the Central Control English
Room mode The currently active time profile for the room is shown by
the room mode. The room mode can also be an automat-
ically triggered operating mode (e.g., summer operation)
[4 How does the temperature control work?, page 19] .
Room target
temperature The room target temperature is the temperature that a
room should have at the selected time in accordance with
the active time profile.
Room temperature The room temperature is the temperature as is currently
measured in the room. If the room temperature is below
the room target temperature, then the room will be
heated.
Time specification The time specification indicates until when the room tar-
get temperature is to be maintained in accordance with
the active time profile.
System status This symbol displays the current operating status of the
Geniax system (e.g., heating mode, fault). See section
10 Symbols [page 99] .
Fig. 2: Room display elements (display)
Time specification [page 11]
Room mode [page 11]
System status [page 11]
Room target temperature [page 11]
Navigating in the selection menus [page 15]
Room temperature [page 11]
Changing main display [page 15]
Current time