Wilo Geniax Central Control, User Manual

Page: 32 / 118

English Daily operation and quick settings
30 WILO SE 04/2011
➥
The display shows the central main display with the
overview of the active time profiles for all the room
user interfaces included in the central control. The
central “Week profile” room mode has been ended and
the preset time profile is active again.
5.2 Temporarily adjusting room temperature
You can use this quick setting to adjust the room temper-
ature for a few hours to suit your needs.
5.2.1 Intervention for the room
If you are too warm or cold at the moment, you can adjust
the temperature in the room for a few hours. To do this,
select a desired room target temperature and a time up to
when the temperature in the room should be maintained.
At the selected time, the current time profile will auto-
matically be activated again.
1. Press the [
Room
] function button in case the room main
display is still not displayed.
➥
The display shows the room main display.
2. Press any of these buttons [

] [

] [

] [

] or [ OK ] on the
navigation button to go to the »
Intervention
« input
menu.
➥
The display shows the »
Intervention
« input menu.
What is shown are the room target temperature and
the time up to when the temperature should be main-
tained that are saved in the active time profile.
If you have already performed an “Intervention”,
the symbol
will be shown in the room main dis-
play. You can, however, change the temperature
again at any time.