English
Daily operation and quick settings
32
WILO SE 04/2011
➥
The display shows the room main display with the
selected room target temperature and the time up
to when this temperature should be maintained.
The symbol
indicates the “Intervention” room
mode. At the end of the set period, the preset time
profile is activated again.
Change entered values?
•
In case you want to change the entered values again, start
again with step
1
.
5.2.2 Editing intervention for the room
You can subsequently edit the intervention in the tem-
perature sequence of the room with this function. You can
only carry out this change if the “Intervention” room mode
is active and the symbol
is shown in the room main dis-
play.
1.
Press the [
] function button in case the room main
display is still not displayed.
➥
The display shows the room main display. The “Inter-
vention” room mode is indicated by the symbol
.
2.
Press the [
] function button.
➥
The display shows the »
« selection menu.
3.
Use the [
You can end the “Intervention” room mode sooner
again [5.2.3 Ending intervention for the room,
page 33].
The symbol
indicates the “heating up” of the
room. A “Quick heating-up” is indicated by the
symbol
.
