Wilo Geniax Central Control, User Manual

Page: 67 / 118

User manual Wilo-Geniax Central Control 65
Daily operation and quick settings English
➥
The display shows the central main display with the
overview of the active time profiles for all the room
user interfaces included in the central control. The
symbol
indicates the central active “Absent” room
mode. The selected settings are applied to all rooms.
At the end of the set period, the preset time profile is
activated again.
5.4.7 Editing absence for a room group
You can subsequently edit the settings for the absence
time profile with this function. You can only carry out this
change if the “Absent” room mode is active and the sym-
bol
is shown in the central main display.
1. Press the [
Central
] function button in case the central
main display is still not displayed.
➥
The display shows the central main display. The
“Absent” room mode is indicated by the symbol
.
2. Press the [
Menu
] function button.
➥
The display shows the »
Menu
« selection menu.
3. Use the [

] and [

] buttons to select the »
Central con-
trol
« menu point and press [ OK ] or [

].
➥
The display shows the »
Central control
« selection
menu.
4. Use the [

] and [

] buttons to select the »
Central active
interventions
« menu point and press [ OK ] or [

].
You can subsequently change the set values
[5.4.7 Editing absence for a room group, page 65]
or end the “Absent” room mode early again
[5.4.8 Ending absence for a room group, page 66].