User manual Wilo-Geniax Central Control
57
Daily operation and quick settings
English
➥
The display shows the »
« selection menu with
the date and the time of your return and the room tar-
get temperature which is set till then.
Apply all values? 17.
In order to apply the values, use the [
to select the »
➥
The display shows the room main display with the
room target temperature and the time up to when this
temperature should be maintained. The symbol
indicates the “Absent” room mode. At the end of the
set period, the preset time profile is activated again.
5.4.3 Editing absence for the room
You can subsequently edit the settings for the absence
time profile with this function. You can only carry out this
change if the “Absent” room mode is active and the sym-
bol
is shown in the room main display.
1.
Press the [
] function button in case the room main
display is still not displayed.
➥
The display shows the room main display. The
“Absent” room mode is indicated by the symbol
.
2.
Press the [
] function button.
You can subsequently change the set values
[5.4.3 Editing absence for the room, page 57] or
end the “Absent” room mode early again
[5.4.4 Ending absence for the room, page 58].
