Wilo Geniax Central Control, User Manual

Page: 36 / 118

English Daily operation and quick settings
34 WILO SE 04/2011
➥
The display shows the »
Intervention (room)
« selection
menu.
4. Use the [

] and [

] buttons to select the »
End
« menu
point and press [ OK ] or [

].
➥
The display shows the room main display with the
room target temperature and the time up to when this
temperature should be maintained. The “Intervention”
room mode has been ended and the preset time profile
is active again.
5.2.4 Intervention (warmer/colder) for a room group
You can adjust the room temperature in all rooms of a
room group by a few degrees. To do this, select the
desired temperature difference from the room tempera-
ture and a time up to when the temperature change
should be maintained.
At the selected time, the current time profile will be auto-
matically activated again.
1. Press the [
Central
] function button in case the central
main display is still not displayed.
➥
The display shows the central main display.
2. Press the [
Menu
] function button.
➥
The display shows the »
Menu
« selection menu.
3. Use the [

] and [

] buttons to select the »
Central con-
trol
« menu point and press [ OK ] or [

].
If no room time profile but rather a central time
profile is active, the respective central room mode
is edited (room group).
If you have already performed an “Intervention”,
the symbol
will be shown in the central main
display. You can, however, change the tempera-
ture again at any time.