Will Burt 711990491, Operating Instructions Manual, Page: 88 / 114

S
TILETTO
AL O
PERATING
I
NSTRUCTIONS
4-2 Original Instructions TP-5418901-F
August 2020
4.2 Shipping
When shipping the Mast System, The Will-Burt Company recommends shipping the mast bolted
down in the original shipping crate. If the original shipping crate is not available, contact The
Will-Burt Company to order a replacement.
Safety Instruction
– Observe Proper Procedures!
Use extreme caution while lifting the Mast
System and when Mast System is suspended to avoid injury and equipment damage. Be certain
the Mast System is properly secured. All operators should be aware of and follow the applicable
local, regional, and national standards and codes of practice for slinging and transporting
equipment. Never lift the Mast System over people. Ensure lifting equipment including, but not
limited to, lifting straps and hoist, are capable of handling the forces generated from lifting the
system. Observe manufacturer instructions on lifting equipment. Death or serious injury could
result if proper procedures are not followed.
When shipping:
1. As necessary, remove the payload.
2. As necessary, prepare the Mast System for transportation (Section 4.1).
3. As necessary, uninstall the Mast System from the mounting structure (Section 2).
4. Secure the Mast System in the shipping crate:
a. Carefully position the mast in the crate.
b. Secure the block at the top of the mast to prevent the mast from shifting in the
shipping crate during transportation.
c. Secure the top half of the wooden mast saddles.
d. As necessary, carefully pack any additional components in the shipping crate.
e. Secure the lid on the shipping crate.