Will Burt 711990491, Operating Instructions Manual, Page: 106 / 114

S
TILETTO
AL O
PERATING
I
NSTRUCTIONS
8-8 Original Instructions TP-5418901-F
August 2020
Table 7-2 Error (Fault) Codes Continued
Error
Code Trigger
Condition
System Response Latch Until Possible Cause
1000 CAN Output
Buffer Overflow CAN Output Buffer
Overflow (ERR 1000):
CAN bus failure. Check
CAN bus connections.
•
System power
is cycled and
trigger
conditions
cleared
CAN Bus cannot be
written to as queued
information has not been
sent.
2000 CAN Input
Buffer Overflow CAN Input Buffer
Overflow (ERR 2000):
CAN bus failure. Check
CAN bus connections.
•
System power
is cycled and
trigger
conditions
cleared
External source has
written CAN buffer and we
have not retrieved the
data, so currently
incoming CAN data
cannot be received.
8000 Firmware Error User Input Error
(ERR 8000):
Refer to product
documentation for valid
commands.
•
5 OVERRIDE
Switch
activations
within 3
seconds
- or -
•
System power
is cycled and
trigger
conditions
cleared
•
Erroneous user input in
the text user interface
during debug mode.
L.S.
ERR
(Legacy)
Both Limit
Switches are
seen as active. Limit Switch Error
Disable the Motor Outputs
unless the OVERRIDE
Switch is also active.
•
Cannot be
cleared until
the condition
causing the
error is fixed.
Use the
OVERRIDE
Switch for
emergency
operation.
•
If the mast is nested, a
magnet may be near
the extended limit
switch.
•
If the mast is extended,
a magnet may be near
the nested limit switch.
•
Wiring damage
•
Connector damage
•
Switch damage