widos 8000 WM SPA, Working Instructions Translation

Page: 44 / 114

Starting and operating Chapter 5
09.06.15 Working Instructions WIDOS 8000 WM SPA page 44 of 108
5.7. How to set the machine type
Abort and back to basic menu by pressing button <C>.
One step back by pressing buttons <Enter> (keeping pressed) and <->.
Display:
2nd line:
WIDOS WM8-2 SPA
09:43 03.05.2014
Display of the currently set machine type
Next menu by pressing simultaneously buttons <-> and <Enter>
Display:
2nd line:
Copy
_
Press button <Enter>
Display:
2nd line:
Traceability
No
Traceability can be select
Press button <+> for Yes
Confirm Yes or No by pressing button <Enter>
In case traceability has been confirmed with „yes“, the display indicates:
Display:
2nd line:
Pipe length
No
Select pipe length for traceability
Press button <+> for Yes
Confirm Yes or No by pressing button <Enter>
Display:
2nd line:
shortened cooling
no
Select the shortened cooling time
Press button <+> for Yes
Confirm Yes or No by pressing button <Enter>
It is allowed to use the shortened cooling time under the following conditions:
-
Welding material: PE and PP
-
Prefabrication under workshop conditions
- Low additional pressure at unclamp
- No additional pressure during further cooling down
- Load onto the workpieces only after being completely cooled down